dmesg - Intel HD 3000
microcode: CPU0 microcode updated early to revision 0x29, date = 2013-06-12
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.2.5-1-ARCH (builduser@tobias) (gcc version 5.2.0 (GCC) ) #1 SMP PREEMPT Tue Oct 27 08:13:28 CET 2015
x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
BIOS-e820: [mem 0x0000000000090000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x00000000b9c30fff] usable
BIOS-e820: [mem 0x00000000b9c31000-0x00000000b9f62fff] type 20
BIOS-e820: [mem 0x00000000b9f63000-0x00000000bc58cfff] usable
BIOS-e820: [mem 0x00000000bc58d000-0x00000000bc61bfff] type 20
BIOS-e820: [mem 0x00000000bc61c000-0x00000000bc61cfff] reserved
BIOS-e820: [mem 0x00000000bc61d000-0x00000000bc657fff] type 20
BIOS-e820: [mem 0x00000000bc658000-0x00000000bc65afff] reserved
BIOS-e820: [mem 0x00000000bc65b000-0x00000000bc65ffff] type 20
BIOS-e820: [mem 0x00000000bc660000-0x00000000bc660fff] reserved
BIOS-e820: [mem 0x00000000bc661000-0x00000000bc66bfff] type 20
BIOS-e820: [mem 0x00000000bc66c000-0x00000000bc66dfff] reserved
BIOS-e820: [mem 0x00000000bc66e000-0x00000000bc68cfff] type 20
BIOS-e820: [mem 0x00000000bc68d000-0x00000000bcebcfff] reserved
BIOS-e820: [mem 0x00000000bcebd000-0x00000000bcfbcfff] ACPI NVS
BIOS-e820: [mem 0x00000000bcfbd000-0x00000000bcffefff] ACPI data
BIOS-e820: [mem 0x00000000bcfff000-0x00000000bcffffff] usable
BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ffe90000-0x00000000ffe96fff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000043dffffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.00 by HPQ
efi: ACPI=0xbcffe000 ACPI 2.0=0xbcffe014 SMBIOS=0xbc66d518
SMBIOS 2.6 present.
DMI: Hewlett-Packard HP EliteBook 8460p/161C, BIOS 68SCF Ver. F.22 12/22/2011
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x43e000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0FFC00000 mask FFFC00000 write-protect
1 base 000000000 mask F80000000 write-back
2 base 080000000 mask FC0000000 write-back
3 base 0BE000000 mask FFE000000 uncachable
4 base 0BD800000 mask FFF800000 uncachable
5 base 100000000 mask F00000000 write-back
6 base 200000000 mask E00000000 write-back
7 base 400000000 mask FC0000000 write-back
8 base 43E000000 mask FFE000000 uncachable
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0xbd000 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
reserving inaccessible SNB gfx pages
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01b36000, 0x01b36fff] PGTABLE
BRK [0x01b37000, 0x01b37fff] PGTABLE
BRK [0x01b38000, 0x01b38fff] PGTABLE
init_memory_mapping: [mem 0x43de00000-0x43dffffff]
[mem 0x43de00000-0x43dffffff] page 2M
BRK [0x01b39000, 0x01b39fff] PGTABLE
init_memory_mapping: [mem 0x420000000-0x43ddfffff]
[mem 0x420000000-0x43ddfffff] page 2M
init_memory_mapping: [mem 0x400000000-0x41fffffff]
[mem 0x400000000-0x41fffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xb9c30fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xb9bfffff] page 2M
[mem 0xb9c00000-0xb9c30fff] page 4k
init_memory_mapping: [mem 0xb9f63000-0xbc58cfff]
[mem 0xb9f63000-0xb9ffffff] page 4k
[mem 0xba000000-0xbc3fffff] page 2M
[mem 0xbc400000-0xbc58cfff] page 4k
BRK [0x01b3a000, 0x01b3afff] PGTABLE
BRK [0x01b3b000, 0x01b3bfff] PGTABLE
init_memory_mapping: [mem 0xbcfff000-0xbcffffff]
[mem 0xbcfff000-0xbcffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[mem 0x100000000-0x3ffffffff] page 2M
RAMDISK: [mem 0x371c4000-0x378d9fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000BCFFE014 000024 (v02 HPQOEM)
ACPI: XSDT 0x00000000BCFFE120 000084 (v01 HPQOEM SLIC-MPC 0000000F 01000013)
ACPI: FACP 0x00000000BCFFC000 0000F4 (v03 HPQOEM 161C 0000000F HP 00000001)
ACPI: DSDT 0x00000000BCFD1000 025281 (v02 HPQOEM 161C 00000001 INTL 20060912)
ACPI: FACS 0x00000000BCF86000 000040
ACPI: FACS 0x00000000BCF86000 000040
ACPI: HPET 0x00000000BCFFB000 000038 (v01 HPQOEM 161C 00000001 HP 00000001)
ACPI: APIC 0x00000000BCFFA000 0000BC (v01 HPQOEM 161C 00000001 HP 00000001)
ACPI: MCFG 0x00000000BCFF9000 00003C (v01 HPQOEM 161C 00000001 HP 00000001)
ACPI: TCPA 0x00000000BCFF7000 000032 (v02 HPQOEM 161C 00000000 HP 00000001)
ACPI: SSDT 0x00000000BCFCE000 000266 (v01 HPQOEM SataAhci 00001000 INTL 20060912)
ACPI: SSDT 0x00000000BCFCD000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20060912)
ACPI: SLIC 0x00000000BCFCC000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
ACPI: SSDT 0x00000000BCFCB000 000852 (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
ACPI: SSDT 0x00000000BCFCA000 0009B1 (v01 PmRef CpuPm 00003000 INTL 20060912)
ACPI: DMAR 0x00000000BCFC9000 0000E8 (v01 INTEL SNB 00000001 INTL 00000001)
ACPI: ASF! 0x00000000BCFF8000 0000A5 (v32 HPQOEM 161C 00000001 HP 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000043dffffff]
NODE_DATA(0) allocated [mem 0x43dfec000-0x43dfeffff]
[ffffea0000000000-ffffea0010ffffff] PMD -> [ffff88042d600000-ffff88043d5fffff] on node 0
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000043dffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000008efff]
node 0: [mem 0x0000000000090000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x00000000b9c30fff]
node 0: [mem 0x00000000b9f63000-0x00000000bc58cfff]
node 0: [mem 0x00000000bcfff000-0x00000000bcffffff]
node 0: [mem 0x0000000100000000-0x000000043dffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000043dffffff]
On node 0 totalpages: 4170234
DMA zone: 64 pages used for memmap
DMA zone: 1182 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 11978 pages used for memmap
DMA32 zone: 766556 pages, LIFO batch:31
Normal zone: 53120 pages used for memmap
Normal zone: 3399680 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0xbda00000-0xbf9fffff
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0xb9c31000-0xb9f62fff]
PM: Registered nosave memory: [mem 0xbc58d000-0xbc61bfff]
PM: Registered nosave memory: [mem 0xbc61c000-0xbc61cfff]
PM: Registered nosave memory: [mem 0xbc61d000-0xbc657fff]
PM: Registered nosave memory: [mem 0xbc658000-0xbc65afff]
PM: Registered nosave memory: [mem 0xbc65b000-0xbc65ffff]
PM: Registered nosave memory: [mem 0xbc660000-0xbc660fff]
PM: Registered nosave memory: [mem 0xbc661000-0xbc66bfff]
PM: Registered nosave memory: [mem 0xbc66c000-0xbc66dfff]
PM: Registered nosave memory: [mem 0xbc66e000-0xbc68cfff]
PM: Registered nosave memory: [mem 0xbc68d000-0xbcebcfff]
PM: Registered nosave memory: [mem 0xbcebd000-0xbcfbcfff]
PM: Registered nosave memory: [mem 0xbcfbd000-0xbcffefff]
PM: Registered nosave memory: [mem 0xbd000000-0xbd9fffff]
PM: Registered nosave memory: [mem 0xbda00000-0xbf9fffff]
PM: Registered nosave memory: [mem 0xbfa00000-0xe00f7fff]
PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
PM: Registered nosave memory: [mem 0xe00f9000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xffe8ffff]
PM: Registered nosave memory: [mem 0xffe90000-0xffe96fff]
PM: Registered nosave memory: [mem 0xffe97000-0xffffffff]
e820: [mem 0xbfa00000-0xe00f7fff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 32 pages/cpu @ffff88043dc00000 s91480 r8192 d31400 u262144
pcpu-alloc: s91480 r8192 d31400 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4103890
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16258740K/16680936K available (5611K kernel code, 922K rwdata, 1768K rodata, 1180K init, 1152K bss, 422196K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:8448 nr_irqs:488 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2594.085 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5190.34 BogoMIPS (lpj=8646950)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150619
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 20K (ffffffff81a0f000 - ffffffff81a14000)
ftrace: allocating 22161 entries in 87 pages
DMAR: Host address width 36
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
DMAR: RMRR base: 0x000000bce9a000 end: 0x000000bceb9fff
DMAR: RMRR base: 0x000000bd800000 end: 0x000000bf9fffff
DMAR-IR: IOAPIC id 0 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i5-2540M CPU @ 2.60GHz (fam: 06, model: 2a, stepping: 07)
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2
microcode: CPU2 microcode updated early to revision 0x29, date = 2013-06-12
#3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (20760.37 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0xbcebd000-0xbcfbcfff] (1048576 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 17:57:38, date: 11/20/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88042ACD2000 00074D (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88042ACE9C00 000303 (v01 PmRef ApIst 00003000 INTL 20060912)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88042ACC7200 000119 (v01 PmRef ApCst 00003000 INTL 20060912)
ACPI : EC: EC started
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [APPR] (off)
ACPI: Power Resource [COMP] (off)
ACPI: Power Resource [LPP] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff window]
pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff window]
pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xd4000000-0xd43fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xd4824000-0xd482400f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.3: [8086:1c3d] type 00 class 0x070002
pci 0000:00:16.3: reg 0x10: [io 0x4090-0x4097]
pci 0000:00:16.3: reg 0x14: [mem 0xd482b000-0xd482bfff]
pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xd4800000-0xd481ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xd482a000-0xd482afff]
pci 0000:00:19.0: reg 0x18: [io 0x4060-0x407f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xd4829000-0xd48293ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xd4820000-0xd4823fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xd4828000-0xd48283ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f]
pci 0000:00:1f.2: reg 0x14: [io 0x409c-0x409f]
pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087]
pci 0000:00:1f.2: reg 0x1c: [io 0x4098-0x409b]
pci 0000:00:1f.2: reg 0x20: [io 0x4040-0x405f]
pci 0000:00:1f.2: reg 0x24: [mem 0xd4827000-0xd48277ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [mem 0xd4700000-0xd47fffff]
pci 0000:00:1c.1: PCI bridge to [bus 02-22]
pci 0000:00:1c.1: bridge window [io 0x2000-0x3fff]
pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd3ffffff]
pci 0000:23:00.0: [197b:2380] type 00 class 0x0c0010
pci 0000:23:00.0: reg 0x10: [mem 0xd4600000-0xd46007ff]
pci 0000:23:00.0: reg 0x14: [mem 0xd4605000-0xd46050ff]
pci 0000:23:00.1: [197b:2392] type 00 class 0x088000
pci 0000:23:00.1: reg 0x10: [mem 0xd4604000-0xd46040ff]
pci 0000:23:00.1: reg 0x30: [mem 0xffff8000-0xffffffff pref]
pci 0000:23:00.2: [197b:2391] type 00 class 0x080501
pci 0000:23:00.2: reg 0x10: [mem 0xd4603000-0xd46030ff]
pci 0000:00:1c.2: PCI bridge to [bus 23]
pci 0000:00:1c.2: bridge window [mem 0xd4600000-0xd46fffff]
pci 0000:24:00.0: [8086:0085] type 00 class 0x028000
pci 0000:24:00.0: reg 0x10: [mem 0xd4500000-0xd4501fff 64bit]
pci 0000:24:00.0: PME# supported from D0 D3hot D3cold
pci 0000:24:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 24]
pci 0000:00:1c.3: bridge window [mem 0xd4500000-0xd45fffff]
pci 0000:25:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:25:00.0: reg 0x10: [mem 0xd4400000-0xd4401fff 64bit]
pci 0000:25:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: PCI bridge to [bus 25]
pci 0000:00:1c.7: bridge window [mem 0xd4400000-0xd44fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: Enabled 5 GPEs in block 00 to 3F
ACPI : EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
e820: reserve RAM buffer [mem 0xb9c31000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbc58d000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbd000000-0xbfffffff]
e820: reserve RAM buffer [mem 0x43e000000-0x43fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
pnp: PnP ACPI init
system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:00: [mem 0x00000000-0x00000fff] could not be reserved
system 00:00: [mem 0xbfa00000-0xbfa00fff] has been reserved
system 00:00: [mem 0xe0000000-0xefffffff] could not be reserved
system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:00: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
system 00:02: [io 0x0200-0x027f] has been reserved
system 00:02: [io 0x1000-0x100f] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0x0400-0x047f] could not be reserved
system 00:02: [io 0x0500-0x057f] has been reserved
system 00:02: [io 0xef80-0xef9f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:06: Plug and Play ACPI device, IDs SYN017b SYN0100 SYN0002 PNP0f13 (active)
pnp: PnP ACPI: found 7 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:23:00.1: can't claim BAR 6 [mem 0xffff8000-0xffffffff pref]: no compatible bridge window
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-22] add_size 200000 add_align 100000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.1: BAR 15: assigned [mem 0xbfb00000-0xbfcfffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [mem 0xd4700000-0xd47fffff]
pci 0000:00:1c.1: PCI bridge to [bus 02-22]
pci 0000:00:1c.1: bridge window [io 0x2000-0x3fff]
pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd3ffffff]
pci 0000:00:1c.1: bridge window [mem 0xbfb00000-0xbfcfffff 64bit pref]
pci 0000:23:00.1: BAR 6: assigned [mem 0xd4608000-0xd460ffff pref]
pci 0000:00:1c.2: PCI bridge to [bus 23]
pci 0000:00:1c.2: bridge window [mem 0xd4600000-0xd46fffff]
pci 0000:00:1c.3: PCI bridge to [bus 24]
pci 0000:00:1c.3: bridge window [mem 0xd4500000-0xd45fffff]
pci 0000:00:1c.7: PCI bridge to [bus 25]
pci 0000:00:1c.7: bridge window [mem 0xd4400000-0xd44fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xdfffffff window]
pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff window]
pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff window]
pci_bus 0000:01: resource 1 [mem 0xd4700000-0xd47fffff]
pci_bus 0000:02: resource 0 [io 0x2000-0x3fff]
pci_bus 0000:02: resource 1 [mem 0xd0000000-0xd3ffffff]
pci_bus 0000:02: resource 2 [mem 0xbfb00000-0xbfcfffff 64bit pref]
pci_bus 0000:23: resource 1 [mem 0xd4600000-0xd46fffff]
pci_bus 0000:24: resource 1 [mem 0xd4500000-0xd45fffff]
pci_bus 0000:25: resource 1 [mem 0xd4400000-0xd44fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
pci 0000:00:1a.0: enabling device (0000 -> 0002)
pci 0000:00:1d.0: enabling device (0000 -> 0002)
pci 0000:25:00.0: enabling device (0000 -> 0002)
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 7256K (ffff8800371c4000 - ffff8800378da000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb2d8e000-0xb6d8e000] (64MB) mapped at [ffff8800b2d8e000-ffff8800b6d8dfff]
RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
hw unit of domain pp0-core 2^-16 Joules
hw unit of domain package 2^-16 Joules
hw unit of domain pp1-gpu 2^-16 Joules
microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x29
microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x29
microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Key type big_key registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: enabling device (0000 -> 0002)
pcieport 0000:00:1c.1: enabling device (0000 -> 0003)
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
pci 0000:23:00.0: Signaling PME through PCIe PME interrupt
pci 0000:23:00.1: Signaling PME through PCIe PME interrupt
pci 0000:23:00.2: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pci 0000:24:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt
pci 0000:25:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:1c.1:pcie04: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xc0000000, mapped to 0xffffc90001c00000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
serial 0000:00:16.3: enabling device (0000 -> 0003)
0000:00:16.3: ttyS0 at I/O 0x4090 (irq = 17, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
Intel P-state driver initializing.
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
NET: Registered protocol family 17
Loading compiled-in X.509 certificates
registered taskstats version 1
zswap: loading zswap
zswap: using zbud pool
zswap: using lzo compressor
Magic number: 7:779:997
rtc_cmos 00:03: setting system clock to 2015-11-20 17:57:39 UTC (1448042259)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1180K (ffffffff818e8000 - ffffffff81a0f000)
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 520K (ffff88000157e000 - ffff880001600000)
Freeing unused kernel memory: 280K (ffff8800017ba000 - ffff880001800000)
random: systemd-tmpfile urandom read with 1 bits of entropy available
[drm] Initialized drm 1.1.0 20060810
[drm] radeon kernel modesetting enabled.
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xd4829000
SCSI subsystem initialized
libata version 3.00 loaded.
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
xhci_hcd 0000:25:00.0: xHCI Host Controller
xhci_hcd 0000:25:00.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:25:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x00000004
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:25:00.0: xHCI Host Controller
xhci_hcd 0000:25:00.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:1d.0: debug port 2
usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 16, io mem 0xd4828000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
firewire_ohci 0000:23:00.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x10
sdhci-pci 0000:23:00.1: SDHCI controller found [197b:2392] (rev 30)
sdhci-pci 0000:23:00.1: enabling device (0000 -> 0002)
sdhci-pci 0000:23:00.1: No vmmc regulator found
sdhci-pci 0000:23:00.1: No vqmmc regulator found
mmc0: SDHCI controller on PCI [0000:23:00.1] using DMA
sdhci-pci 0000:23:00.2: SDHCI controller found [197b:2391] (rev 30)
sdhci-pci 0000:23:00.2: Refusing to bind to secondary interface.
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xd4827000 port 0xd4827100 irq 36
ata2: SATA max UDMA/133 abar m2048@0xd4827000 port 0xd4827180 irq 36
ata3: DUMMY
ata4: SATA max UDMA/133 abar m2048@0xd4827000 port 0xd4827280 irq 36
ata5: SATA max UDMA/133 abar m2048@0xd4827000 port 0xd4827300 irq 36
ata6: SATA max UDMA/133 abar m2048@0xd4827000 port 0xd4827380 irq 36
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 4-1: new high-speed USB device number 2 using ehci-pci
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: ATA-9: GOODRAM CX100, SAFM11.0, max UDMA/133
ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA GOODRAM CX100 11.0 PQ: 0 ANSI: 5
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 8 ports detected
firewire_core 0000:23:00.0: created device fw0: GUID ffe473fffffffffe, S400
usb 1-1.1: new full-speed USB device number 3 using ehci-pci
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata2.00: ATAPI: hp CDDVDW SN-208BB, HH01, max UDMA/100
ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata2.00: configured for UDMA/100
usb 4-1.4: new high-speed USB device number 3 using ehci-pci
scsi 1:0:0:0: CD-ROM hp CDDVDW SN-208BB HH01 PQ: 0 ANSI: 5
usb 1-1.2: new high-speed USB device number 4 using ehci-pci
tsc: Refined TSC clocksource calibration: 2594.104 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x25647a45c02, max_idle_ns: 440795287674 ns
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
sd 0:0:0:0: [sda] Attached SCSI disk
sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
raid6: sse2x1 gen() 4216 MB/s
raid6: sse2x1 xor() 4270 MB/s
clocksource: Switched to clocksource tsc
raid6: sse2x2 gen() 8955 MB/s
raid6: sse2x2 xor() 7703 MB/s
raid6: sse2x4 gen() 12670 MB/s
raid6: sse2x4 xor() 9565 MB/s
raid6: using algorithm sse2x4 gen() 12670 MB/s
raid6: .... xor() 9565 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: automatically using best checksumming function:
avx : 24498.000 MB/sec
Btrfs loaded
BTRFS: device fsid e3586d93-bef8-4a0b-ab11-794ea2b0faef devid 1 transid 16837 /dev/sda3
BTRFS: device fsid c98c67da-4e82-4b58-86ae-524891c31417 devid 1 transid 196 /dev/sda6
BTRFS info (device sda3): disk space caching is enabled
BTRFS: has skinny extents
BTRFS: bdev /dev/sda3 errs: wr 0, rd 1, flush 0, corrupt 0, gen 0
BTRFS: detected SSD devices, enabling SSD mode
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 227 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Listening on Journal Socket.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Reached target Paths.
systemd[1]: Created slice System Slice.
systemd[1]: Mounting Temporary Directory...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Reached target Slices.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Journal Service...
systemd[1]: Mounting Debug File System...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Created slice system-getty.slice.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Starting Set Up Additional Binary Formats...
systemd[1]: Reached target Login Prompts.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted Temporary Directory.
BTRFS info (device sda3): turning on discard
BTRFS info (device sda3): use spread ssd allocation scheme
BTRFS info (device sda3): disk space caching is enabled
systemd[1]: Mounted Debug File System.
systemd[1]: Started Remount Root and Kernel File Systems.
systemd[1]: Started Setup Virtual Console.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 193 (systemd-binfmt)
systemd[1]: Mounting Arbitrary Executable File Formats File System...
vboxdrv: Found 4 processor cores
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Mounted Arbitrary Executable File Formats File System.
systemd[1]: Started Set Up Additional Binary Formats.
systemd[1]: Started Load/Save Random Seed.
vboxdrv: TSC mode is Invariant, tentative frequency 2594102938 Hz
vboxdrv: Successfully loaded version 5.0.8_OSE (interface 0x00240000)
systemd[1]: Started Load Kernel Modules.
systemd[1]: Mounting Configuration File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounted Configuration File System.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Reached target Local File Systems (Pre).
systemd[1]: Started udev Coldplug all Devices.
systemd[1]: Started udev Kernel Device Manager.
systemd[1]: Started Journal Service.
systemd-journald[186]: Received request to flush runtime journal from PID 1
ACPI: AC Adapter [AC] (on-line)
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
ACPI: Power Button [PWRF]
hp_accel: hardware type HPB64xx found
lis3lv02d: 8 bits 3DC sensor found
tpm_tis 00:01: 1.2 TPM (device-id 0xB, rev-id 16)
input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input8
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Battery Slot [BAT1] (battery absent)
wmi: Mapper loaded
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [CPUZ] (50 C)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.5-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [GFXZ] (0 C)
thermal LNXTHERM:02: registered as thermal_zone2
ACPI: Thermal Zone [EXTZ] (41 C)
thermal LNXTHERM:03: registered as thermal_zone3
ACPI: Thermal Zone [LOCZ] (35 C)
thermal LNXTHERM:04: registered as thermal_zone4
ACPI: Thermal Zone [BATZ] (36 C)
thermal LNXTHERM:05: registered as thermal_zone5
ACPI: Thermal Zone [PCHZ] (0 C)
cdc_acm 1-1.2:1.1: ttyACM0: USB ACM device
cdc_acm 1-1.2:1.3: ttyACM1: USB ACM device
cdc_acm 1-1.2:1.9: ttyACM2: USB ACM device
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
cdc_wdm 1-1.2:1.5: cdc-wdm0: USB WDM device
cdc_wdm 1-1.2:1.8: cdc-wdm1: USB WDM device
usbcore: registered new interface driver cdc_wdm
cdc_ncm 1-1.2:1.6: MAC-Address: 02:80:37:ec:02:00
cdc_ncm 1-1.2:1.6 usb0: register 'cdc_ncm' at usb-0000:00:1a.0-1.2, CDC NCM, 02:80:37:ec:02:00
usbcore: registered new interface driver cdc_ncm
usbcore: registered new interface driver cdc_mbim
tpm_tis 00:01: TPM is disabled/deactivated (0x7)
parport_pc 00:04: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 5 [PCSPP,TRISTATE,EPP]
media: Linux media interface: v0.10
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device HP HD Webcam [Fixed] (1bcf:2888)
Adding 1048572k swap on /dev/sda2. Priority:-1 extents:1 across:1048572k SSFS
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) e4:11:5b:52:17:86
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[drm] Memory usable by graphics device = 2048M
checking generic (c0000000 300000) vs hw (c0000000 10000000)
fb: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
BTRFS info (device sda6): setting nodatacow, compression disabled
BTRFS info (device sda6): use ssd allocation scheme
BTRFS info (device sda6): turning on discard
BTRFS info (device sda6): use spread ssd allocation scheme
BTRFS info (device sda6): disk space caching is enabled
BTRFS: has skinny extents
input: PC Speaker as /devices/platform/pcspkr/input/input10
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:0b: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input11
[drm] Initialized i915 1.6.0 20150522 for 0000:00:02.0 on minor 0
snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150619/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150619/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150619/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150619/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
fbcon: inteldrmfb (fb0) is primary device
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD81B1X5: line_outs=1 (0xa/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_idt hdaudioC0D0: speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_idt hdaudioC0D0: inputs:
snd_hda_codec_idt hdaudioC0D0: Mic=0xc
snd_hda_codec_idt hdaudioC0D0: Internal Mic=0x11
snd_hda_codec_idt hdaudioC0D0: Line=0xf
iwlwifi: unknown parameter 'power_safe' ignored
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:24:00.0: enabling device (0000 -> 0002)
iwlwifi 0000:24:00.0: can't disable ASPM; OS doesn't have ASPM control
iwlwifi 0000:24:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
input: HP HD Webcam [Fixed] as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.4/4-1.4:1.0/input/input17
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
iwlwifi 0000:24:00.0: CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:24:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
iwlwifi 0000:24:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
iwlwifi 0000:24:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
iwlwifi 0000:24:00.0: L1 Enabled - LTR Disabled
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
ppdev: user-space parallel port driver
cdc_ncm 1-1.2:1.6 enp0s26u1u2i6: renamed from usb0
input: HP WMI hotkeys as /devices/virtual/input/input21
e1000e 0000:00:19.0 enp0s25: renamed from eth0
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
iwlwifi 0000:24:00.0 wlo1: renamed from wlan0
IPv6: ADDRCONF(NETDEV_UP): enp0s26u1u2i6: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s26u1u2i6: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
iwlwifi 0000:24:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:24:00.0: Radio type=0x1-0x2-0x0
cdc_ncm 1-1.2:1.6 enp0s26u1u2i6: network connection: disconnected
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
iwlwifi 0000:24:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:24:00.0: Radio type=0x1-0x2-0x0
Console: switching to colour frame buffer device 200x56
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input9
mousedev: PS/2 mouse device common for all mice
psmouse serio4: synaptics: queried max coordinates: x [..5728], y [..4916]
psmouse serio4: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x640000/0xa0400/0x0, board id: 1623, fw id: 790122
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input24
suspend_common(): ehci_suspend+0x0/0xe0 [ehci_hcd] returns -16
pci_pm_runtime_suspend(): hcd_pci_runtime_suspend+0x0/0x50 [usbcore] returns -16
random: nonblocking pool is initialized
iwlwifi 0000:24:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:24:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:24:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:24:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
fuse init (API version 7.23)
iwlwifi 0000:24:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:24:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:24:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:24:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
iwlwifi 0000:24:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:24:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:24:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:24:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
wlo1: authenticate with 4c:09:d4:d3:15:00
wlo1: send auth to 4c:09:d4:d3:15:00 (try 1/3)
wlo1: authenticated
wlo1: associate with 4c:09:d4:d3:15:00 (try 1/3)
wlo1: RX AssocResp from 4c:09:d4:d3:15:00 (capab=0x411 status=0 aid=3)
wlo1: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
cfg80211: Regulatory domain changed to country: NL
cfg80211: DFS Master region: ETSI
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
sha256_ssse3: Using AVX optimized SHA-256 implementation
IPv6: wlo1: IPv6 duplicate address fe80::8e70:5aff:fe28:7910 detected!
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usb 1-1.2: USB disconnect, device number 4
cdc_ncm 1-1.2:1.6 enp0s26u1u2i6: unregister 'cdc_ncm' usb-0000:00:1a.0-1.2, CDC NCM
usb 1-1.2: new high-speed USB device number 5 using ehci-pci
cdc_acm 1-1.2:1.1: ttyACM0: USB ACM device
cdc_acm 1-1.2:1.3: ttyACM1: USB ACM device
cdc_wdm 1-1.2:1.5: cdc-wdm0: USB WDM device
cdc_ncm 1-1.2:1.6: MAC-Address: 02:80:37:ec:02:00
cdc_ncm 1-1.2:1.6 usb0: register 'cdc_ncm' at usb-0000:00:1a.0-1.2, CDC NCM, 02:80:37:ec:02:00
cdc_wdm 1-1.2:1.8: cdc-wdm1: USB WDM device
cdc_acm 1-1.2:1.9: ttyACM2: USB ACM device
cdc_ncm 1-1.2:1.6 enp0s26u1u2i6: renamed from usb0
IPv6: ADDRCONF(NETDEV_UP): enp0s26u1u2i6: link is not ready
cdc_ncm 1-1.2:1.6 enp0s26u1u2i6: kevent 12 may have been dropped
IPv6: ADDRCONF(NETDEV_UP): enp0s26u1u2i6: link is not ready
cdc_ncm 1-1.2:1.6 enp0s26u1u2i6: network connection: disconnected
capability: warning: `turbostat' uses 32-bit capabilities (legacy support in use)